50 Comments

  1. Jose Rodriguez on October 12, 2020 at 3:54 am

    How much an aluminum 26 stretch Micargi mustang gts limosine bicycle will cost ?
    https://www.chubbysbikes.com/Chopper-Beach-Cruiser-Bicycles-_c_39.html



  2. Lili Kalela on October 12, 2020 at 3:54 am

    Ngg k c tu PBB vf gundul sering di tdk ING udh ING TTS tik TTS tik id km



  3. O o on October 12, 2020 at 3:55 am

    @Ron Covell 
    Thank you very much friend. I appreciate your kind reply. In the case of small workshops that do not have heat treatment, what do you recommend for welding, what contribution ER 4043 or ER 5554?

    Many greetings friend. From Mexico City.



  4. 浅羽直之 on October 12, 2020 at 3:55 am

    見たことあるフレームだと思ったらサンタクルズかー。
    すごいなー



  5. rick s on October 12, 2020 at 4:06 am

    I wish Commencal saw this!! I’ve had two broken frames from them, all short of warranty expiration but neither honored! They admit to over heating but keep doing it!!



  6. Elias Boysen on October 12, 2020 at 4:07 am

    Hi. I would like to know what type of oven you use. And how much heat. Because I may want to modify a frame or two.



  7. Bryin E. Willis on October 12, 2020 at 4:07 am

    > a day…



  8. Hit em with the smoke on October 12, 2020 at 4:07 am

    I need help I cracked my aluminum alloy frame can it be welded and with what?



  9. William Rodrigues dos Santos on October 12, 2020 at 4:08 am

    Excellent job ! Congratulations !



  10. banana brrnc on October 12, 2020 at 4:09 am

    Esta de aluminio si Bale la pena



  11. yulmp2 on October 12, 2020 at 4:10 am

    My “ Handmade in USA” Cannondale mountain bike has beautiful welds.



  12. deparpe JPet odile on October 12, 2020 at 4:11 am

    salut bon travail..👍👍👍👍👍



  13. SOF RANES on October 12, 2020 at 4:11 am

    Love it



  14. not an impostor on October 12, 2020 at 4:12 am

    Akhirnya bisa tidur nyenyak🗿



  15. zackzeko on October 12, 2020 at 4:13 am

    What is the thickness of the tube ? what is the aluminum name/number please ?



  16. Masakrator 7002 on October 12, 2020 at 4:13 am

    przyda się kubie



  17. J B on October 12, 2020 at 4:14 am

    How much does a handmade USA bicycle frame sell for?



  18. serafin escamilla on October 12, 2020 at 4:15 am

    Hi there..can a crack on aluminium bike frame be welded?



  19. mark koso on October 12, 2020 at 4:16 am

    Thanks for the video. I was wondering what kind of testing is done after welding to ensure there are no cracks in the welds or the aluminum tubing.



  20. Rudá Bittencourt on October 12, 2020 at 4:21 am

    I think is made from 7075 T6 aluminum



  21. Rafael C on October 12, 2020 at 4:23 am

    He is a very skilled welder, not anyone can weld aluminum like that.



  22. docker5468 on October 12, 2020 at 4:25 am

    I bet everything in the welders house is super neat and precise, to match his work



  23. Augusto Jimenez on October 12, 2020 at 4:27 am

    EYESORE..SO ROUGH!



  24. doofwop on October 12, 2020 at 4:28 am

    I still have an SC aluminum 26" Chameleon hardtail from 2001 when they were still made in USA. Welds are beautiful on this frame. I cracked the seatstay and sent it to Frank The Welder who repaired it and it hung in his shop for two years until I remembered he had it. Got it back and built it up deluxe, now it’s my commuter. Sadly an aluminum frame is not something you want to keep beating on for years due to its relatively low fatigue life when compared to steel or Ti so in order to keep riding it I’ll just have to tone it down. But the geometry is a perfect fit for my body dimensions and riding style.



  25. Herb Whitmore on October 12, 2020 at 4:28 am

    I know how to anneal aluminum .. I need to know how to heat treat it ..



  26. Caylan Wojciechowski on October 12, 2020 at 4:29 am

    I knew what frame it was from the get go



  27. Saiful gagah Channel on October 12, 2020 at 4:29 am

    nice…



  28. Areeb Rides MTB on October 12, 2020 at 4:33 am

    Are welds on a 1000 dollar bike significantly weaker than welds 2000/3000 dollar bikes?



  29. 아무것도 안하고 구독자 5000명되기 on October 12, 2020 at 4:33 am

    WOW



  30. SAGU SERUMPUN on October 12, 2020 at 4:33 am

    Beautiful



  31. Akshay Shinde on October 12, 2020 at 4:35 am

    What is welding process?



  32. Nightbot on October 12, 2020 at 4:36 am

    Łapa w dół. Po Polsku proszę,!!!



  33. Truth Is In Nature on October 12, 2020 at 4:38 am

    What is your state bird and what does its turds look like…thats how I weld. I grind therefore I am a better welder.



  34. joko on October 12, 2020 at 4:38 am

    What the tig thipe?



  35. rendra tegar on October 12, 2020 at 4:40 am

    Can I have your bicycle? continued success for the channel



  36. oyze on October 12, 2020 at 4:40 am

    wish I could weld that neat



  37. Rudá Bittencourt on October 12, 2020 at 4:41 am

    I have one V10. Nice video



  38. Martin Geldart on October 12, 2020 at 4:42 am

    Safety first – I wore my welding mask for this video.



  39. Dhavin Jokam on October 12, 2020 at 4:42 am

    Polygon bike from Indonesia is amazing



  40. Herb Whitmore on October 12, 2020 at 4:43 am

    Hi Ron where does your friend have his frames heattreated ? By the way we have a mutual friend , Dennis Web



  41. Carlos Barajas on October 12, 2020 at 4:43 am

    I have a question for you, I used to ride a recumbent trike, and a car hit me, as a result the main frame got fractured, and eventually broke apart, somebody told me that it can be solder together, yet where I live nobody knows how to do it, and some people even say , that it can’t be done, so if I could send you some picks so you can give your profesional opinion, and if you are up to it I could send it to you.
    I hope to hear from you Carlos



  42. Markus Patients on October 12, 2020 at 4:43 am

    This is how the Chinese made my Geneses Incline Walmart sold bicycle. Another High-end planet savor…



  43. calikalbo calikalbo on October 12, 2020 at 4:44 am

    1st you didn’t brush before welding, 2nd you are not using a gas lens, 3rd you keep taking the rod out of the gas zone after dabbing, 4th even on material of that thickness a little pre-heat is good and 5th you need a lot more practice.



  44. Kirsten Spencer on October 12, 2020 at 4:45 am

    No back purge ?



  45. kmurali krishna on October 12, 2020 at 4:47 am

    I understand that is normal tube as headTube but I really don’t know after that how you guys are make it process for headset …I wud like to see complete video on headTube process..can any one help me, I’m sure that tube is not suitable for headset, there is some next process…kindly help ….



  46. kaynakçı gaziantep on October 12, 2020 at 4:49 am

    how is this
    @



  47. Chief DARK HORSE on October 12, 2020 at 4:49 am

    Amazing 👏



  48. Dae Kim on October 12, 2020 at 4:51 am

    This seems like an older video than 2016



  49. TheMagno707 on October 12, 2020 at 4:51 am

    What kind of brand is that framework?



  50. Paladini on October 12, 2020 at 4:52 am

    What kind of welder is that? Thanks man